Instruction manual
SN503-8CH
18
Time Display
The SN503-8CH allows you to select if you would like the time and date displayed while in live view or
while recording.
To Enable/Disable the Time Display:
1. Select the drop down list next to the time display mode you would like to change.
2. Select “OFF” or “ON.”
3. Select “APPLY” to save your settings.
Time Display Options
Privacy Zone
“PRIVACY ZONE” allows you to set up to four adjustable areas
per camera that you wish to mask or remain private. When
enabled, the desired private location(s) will appear black on
the viewing screen.
To Setup Privacy Zone:
1. Select “PRIVACY ZONE” from the Camera Setup menu.
2. Navigate to the desired channel, then, from the “PRIVACY
ZONE” drop down list, select the option from “OFF” to “ON.”
3. There will be four check boxes titled “AREA” 1 through 4.
Choose how many individual privacy zones you would like
to have by selecting the corresponding check box.
4. When the desired amount of privacy zones have been
chosen, select “SETUP” to congure the location and size
of each zone.
5. Left click, hold and drag the green privacy zone box over
the desired area you would like to be made private.
6. To adjust the size of the privacy zone, navigate to the
green border of the privacy zone, then left click, hold and
drag the box to desired size.
7. When the privacy zones have been set, right click to exit.
8. Select “APPLY” to save settings, then “EXIT” to close
Privacy Zone Setup
Screenshot
MAIN MENU