Instruction manual
SN503-8CH
22
MAIN MENU
NETWORK SETUP MENU
The network setup menu is your gateway to
viewing footage online. The SN503-8CH is
pre-congured to work with most network
setups. The network setup menu allows you
to congure all the settings necessary to view
your DVR online. You can adjust the way the
DVR acquires an IP address, which ports are
used to communicate with the DVR, DNS and set
information for a DDNS account.
Network Menu
Type:
Determines how the LCD-DVR will acquire and IP address: DHCP, Static IP or PPoE.
DHCP:
Dynamic Host Conguration Protocol (DHCP) is the most common setup for
home or oce networks. This allows the LCD-DVR to automatically acquire an IP
address from the router. By default, the IP mode will mode will be set to DHCP.
Static IP:
Static IP addresses are manually assigned by the administrator. A static IP
address would be benecial if your internal IP changes frequently.
PPPoE:
Used for DSL services where individuals connect to a DSL modem. It is
recommended to store PPPOE information in the router. If the information is
not stored in the router, the DSL model will need to be congured. Contact your
Internet Service Provider for details on modem conguration.
To adjust the type of IP Mode you are using:
1. Select the drop down menu beside the word TYPE.
2. Highlight the IP Mode you would like to use and press select.
3. Select “apply” to save your changes.