Instruction manual

SN503-8CH

ONLINE SOFTWARE

Live Mode

The st tab along the top of the screen for the online viewing allows you to view the DVR in live mode. From this

mode the buttons along the side and their functions are as follows:

5. Close/Open Window: Selecting this icon closes all the windows in live mode revealing a blank screen. Click this

icon again to open all windows back up

6. Single Screen View: Selecting this will open up a full screen view of the screen you have highlighted

7. Quad Screen View: Selecting this will open a quad screen view of all 4 cameras.

8. 8 Screen View: The software is adaptable for other DVRs, selecting this would show 9 screens for an 8

channel DVR

9. 16 Channel View: The software is adaptable for other DVRs, selecting this would show 16 screens for a 16

channel DVR

10. Volume Control: This controls the volume if an audio supported camera or microphone is connected (not

included). Pointing and dragging the mouse across the volume bars turns the volume up

and down. To mute the sound, click the speaker icon next to the volume bars

1. PTZ Camera Controls:

Selecting this function opens

up PTZ control menu. For more

information see “PTZ options” on

Pg 67

2. Cruise Setup:

This function allows you to

setup directions for the PTZ

to follow, the PTZ camera will

cruise through your set positions

and times. Not all PTZ cameras

have this function. For more

information see “PTZ options” on

Pg 67

3. Record:

Pressing this button prompts the

DVR to record footage directly

onto your computer. To stop the

recording, press the record button

again. The recorded footage will

automatically save to the selected

location on your computer.

4. Capture:

Pressing this button prompts the

DVR to take a snapshot of the

screen and automatically save the

picture to the selected location on

your computer.