Manual

H2PPC08004 MINI GRILLE (FITS 2008-2010 H2)
INSTALLATION INSTRUCTIONS
Remove the screws and washer first.
Method #1 (best done with two people) – open the hood. Person one, from the front of the
vehicle holds the mini grille in place while person two installs the screws and washers from inside
the hood area.
Method #2 (only one person required) – Grab hold of the stock black plastic grille and pull it off –
it’s held in place by 4 clips. Place the mini grille in place and insert the screws and washers. Press
the Grille assembly back into the 4 slots and secure with clips.
Defenderworx, Inc.
1120 North Armando Avenue
Anaheim, CA 92806
[phone] Phone
[phone] FAX
www.defenderworx.com