Operating instructions

17
5 Operation
5.1 Fillingthewatertank(PH28only)
1
4
2
5
3
6
SwitchofftheDefensorPH28and
disconnecttheunitfromthemains
(pull the mains plug out of the
socket).
Press the snap and fold out the
water tank carriage.
Pull out the handle and slide the wa-
tertankcarriageoutoftheunit.
CAUTION! In order to avoid water
damage, immediatelly remove any
spilledwaterontheoorandonthe
componentsoftheunit.
Lay down the water tank carriage,
removethetankcapandllthetank
with tap water using the supplied
llinghose.Do not use additives.
Relocate the tank cap.
Important! Screw on tank cap until
itcomestoastop!
CAUTION! In order to avoid water
damage, completely remove any
spilled water on the water tank
carriage.
Slide the water tank carriage into the
unit, then tip it up to the stop.
Pressthe lockmechanismof the
handleonbothsidesofthecarriage
and the handle slides down. Tip up
the water tank carriage until the lock
engages.Thewaternowowsinto
the base tub.
Important! After reinstalling
the water tank carriage wait by
the unit until the lling sound
stops.