Instructions / Assembly

THANK YOU
We appreciate the trust and con dence you have placed in De ant through the purchase
of this outdoor plug-in light sensing timer. We strive to continually create quality products
designed to enhance your home. Visit us online to see our full line of products available for
your home improvement needs. Thank you for choosing De ant!
USE AND CARE GUIDE
OUTDOOR PLUG-IN LIGHT SENSING TIMER
Power
Outlet
DUSK-
DAWN
8Hr
6Hr
4Hr
2Hr
ON
OFF
Safety Information
This product is suitable for use with outdoor appliances. This is a grounded device. It has a
grounded plug and one grounded outlet.
Store indoors when not in use.
WARNING: RISK OF ELECTRIC SHOCK.
Do not use with an extension cord.
Plug directly into a GFCI electrical outlet.
Fully insert the plug.
Unplug the timer before cleaning.
Keep children away.
WARNING: RISK OF FIRE.
Do not use to control appliances that contain heating elements, cooking
appliances, heaters, irons, etc.
Do not exceed electrical ratings.
WARNING: Suitable for outdoor locations. Not for water immersion or for
use where directly exposed to water. When used for controlling pool pump,
receptacle must not be less than 10 ft. from the inside walls of a pool.
CAUTION: When used outdoors, plug only into a GFCI protected receptacle.
Ensure the receptacle is mounted in an approved “weatherproof while is use”
type outlet box.
Ratings
125V AC 60 Hz
15A General Purpose
1875W General Purpose
1250W Tungsten
½ HP
PRODUCT DESCRIPTION
Power
Outlet
DUSK-
DAWN
8Hr
6Hr
4Hr
2Hr
ON
OFF
C
D
B
A
A. Power Cord/Plug: Plug this into a GFCI outlet to power the timer.
B. Light Sensor: The timer must be mounted in a location that allows for direct
sunlight to ensure proper functionality for the dusk-to-dawn feature.
C. Timer Dial: Rotate to one of the following settings:
OFF: Turns the timer off.
ON: Turns the timer on.
2Hr, 4Hr, 6Hr, or 8Hr: Timer turns on at dusk and off after the selected time
2, 4, 6, or 8 hours later.
Dusk-Dawn: Timer turns on at dusk and off at dawn.
D. Receptacle: Plug in the device you wish to be on a timer.
Installation
1
Mounting the timer
Mount the timer onto a wall near
a GFCI receptacle with the timer’s
light sensor (B) facing outward.
Install a nail or screw head (not
included) into a wall. The nail or
screw must extend at least 7/8
in. out from the wall and allows
the timer to be 3 ft. (0.9 m) above
ground level.
Power
Outlet
DUSK-
DAWN
8Hr
6Hr
4Hr
2
H
r
ON
OFF
B
NOTE: To ensure proper operation of the automatic function, ensure the light sensor is shielded
from all night time sources of light, such as  oodlights.
Warranty
1 YEAR WARRANTY
The manufacturer guarantees this product to be free of defects in materials and
workmanship for 1 year from the date of purchase. If this product is defective, call 866-308-
3976 for repair or replacement parts or return the product to the store from which it was
purchased. This guarantee does not include normal wear and tear, LEDs, or batteries.
Contact the Customer Service Team at 1-866-308-3976 or visit www.HomeDepot.com.
Installation
2
Installing the timer
Hang the timer from the eyelet on
the top right of the unit with the
receptacle (D) facing downward so
that moisture does not accumulate
in the outlet.
Plug the grounded power cord (A)
into a GFCI outlet.
Plug the device you wish to be on a
timer into the receptacle (D).
Power
Outlet
DUSK-
DAWN
8Hr
6Hr
4Hr
2Hr
ON
OFF
D
A
Troubleshooting
Problem Possible Cause Corrective Action
The lights do not turn on
at dusk.
The timer is not in a good
area for the light sensor
to function as there is too
much ambient light to
detect darkness.
Move the timer to another
location where there is no
ambient light.
The lights do not turn on,
even when the timer is in
the ON position.
The lights are not in the
ON position, the lights
are not functioning, or
the timer is not receiving
power.
Ensure that lights are
functional by plugging
them directly into the
outlet. Ensure that lights
are in the ON position
if they have their own
switch. Ensure that the
timer is receiving power
- the LED should light up
when plugged into an
outlet and put in the ON
position.
The lights on the timer
are  ashing (turning on
and off).
The timer is in Dusk-
to-Dawn mode and the
light from the plugged-in
lights is affecting the light
sensor.
Move the lights away from
the timer, or reposition the
timer so that it does not
face the lights.
Questions, problems, missing parts? Before returning to the store,
call De ant Customer Service
8 a.m.-6 p.m., EST, Monday-Friday
1-866-308-3976
HOMEDEPOT.COM
Item# 0000000000

Summary of content (1 pages)