Use and Care Manual

7 HOMEDEPOT.COM
Please contact 1-866-308-3976 for further assistance.
Operation
1
Charging the battery
□ Before the 48 LED Solar Motion Light can operate to its full
capacity, the solar panel needs to be in sunlight for 3 days
to fully charge the included battery. Charge the unit in the
“OFF” position.
ON OFFAUTO
ON
OFF
A
UT
O
2
Using the motion light switch
□ Turn the switch to the “AUTO” position, once the battery
is fully charged. Then the light will turn on automatically
at night when motion is detected by the motion detector
head.
ON OFFAUTO
O
N
O
FF
A
U
TO
3
Using the control dials
The 48 LED Solar Motion Light has 3 different control dials, which
control the light’s duration, sensitivity to light, and sensitivity to
motion.
1. SENS (Sensitivity)
This dial determines the range of motion detection.
2. TIME
This dial sets the duration of illumination time.
3. LUX (Light level)
This dial tells the sensor the level of darkness that must be
reached before the light turns on.
□ If set to the sensor will trigger the light to turn on in the
daytime.
□ If set to the sensor will only trigger the light to turn on
at dusk or when it is dark. This is the ideal position for
general usage.
SENS TIME LUX
MAX MED MIN
ON
OF
F
A
UT
O
NOTE:
Turn the switch to the “ON” position to override the motion
detection. This feature allows a limited time of constant
illumination.