Use and Care Manual

9 HOMEDEPOT.COM
Please contact 1-866-308-3976 for further assistance.
Maintenance
Periodically check the connection from the solar panel to the light. Ensure this plug is correctly inserted.
□ Some seasonal adjustment of the solar panel may be required to offset shorter charge days during the winter.
□ Ensure the solar panel is free from any obstruction such as trees or buildings.
Care and Cleaning
□ The solar panel should be cleaned on a regular basis. This will ensure the 48 LED Solar Motion light charges consistently.
□ To clean the solar panel, use a damp cotton cloth. Never use any abrasive materials or cleaning products.
□ The lens of the LED light should also be cleaned with a damp cotton cloth. This ensures a clear illumination.
Troubleshooting
Problem Solution
Where should the solar panel be mounted? □ Mount the solar panel in a position that will enable the
maximum amount of light to be absorbed. In the Northern Hemi-
sphere this is usually south facing.
Does the solar panel require direct sun to charge? □ The solar panel can charge the internal battery in direct and
indirect light. For best results, place the panel in direct light
to maximize and increase efciency.
Can additional or extended cable wire for the 48 LED Solar Motion
Light be purchased?
□ At this point there are no extensions available for the cable that
connects the light to the solar panel. Any additions to the cable
will void the warranty.
Why does the 48 LED Solar Motion Light not illuminate at night? □ See Operation (Step 3) on page 7. It may be required to
re-adjust the light’s LUX dial setting.
Where can a new battery for the 48 LED Solar Motion Light be
purchased?
□ Please contact www.homedepot.com
or call 1-866-308-3976.
Are any parts of the 48 LED Solar Motion Light weatherproof? □ All parts of the 48 LED Solar Motion Light are fully weather-
proofed and are ideal for any exterior installation.
Why does the 48 LED Solar Motion Light appear to ‘strobe’ or ash? □ Turn the 48 LED Solar Motion Light to the “OFF” position. Allow
the battery to recharge for two full sunny days. At the end of the
second day, turn the light to the “AUTO” position. See Operation
(Step 3) on page 7 to conrm the light’s LUX dial settings. The
48 LED Solar Motion Light should now work as required.
Will decorative or street lights have an effect on the 48 LED Solar
Motion Light’s ability to operate?
□ Yes, the sensor of the 48 LED Solar Motion Light is light
sensitive. For nighttime usage, ensure no other light
activates the motion sensor.