Instructions / Assembly

Range

Range Setting

Setting

Walk in the area to be tested. (FIG. 5 )(FIG. 6 ) . When your motion

is detected, the lights will turn on. The detected area will reach 50

feet when RANGE dial had been turned to MAX.

Operation:

Place the sensor switch in the 1 or 5 minute mode for normal

operation. Actual normal operating time will vary depending upon

how frequently the light is turned on by the motion sensor and

amount of sunlight collected.

disable the light, place the switch

in the OFF position.

Charging

Charging the

the

the battery:

battery:

For optimum performance , it is best to install the solar light in full

sunlight and charge for 10-12 hours. Allow the light to run at least

8-12 entire charging and discharging cycles to reach battery ’ s

maximum capacity.

REPLACING

REPLACING THE

THE

THE BATTERY

BATTERY

For best performance, replace with three rechargeable 1.2V AA

NI-MH/CD 900m h A batter ies every year or when performance

diminishes.

Mode On-Time Works: Day Night

Test

5 Seconds × ×

Auto 1 or 5 Minutes ×

FIG. 5 FIG. 6