Full Product Manual

7 HOMEDEPOT.COM

Please contact 1-866-308-3976 for further assistance.

Installation (continued)

Installing the mounting plate

NOTE: Make sure there is enough vertical space above the

mounting plate to allow the light xture to be mounted.

Place the mounting plate (AA) against the mounting surface and

ensure the mounting plate (AA) is level. Mark the hole locations

on the mounting surface, through which the mounting screws (CC)

will be threaded.

□ If mounting to a wooden surface, drill two 3/32 in. holes

into the mounting surface. Install the two mounting screws

(CC) through the mounting plate (AA) and into the mounting

surface.

□ If mounting to wall board or brick, drill two 7/32 in. holes

into the mounting surface. Insert the wall anchors (DD) and

attach the mounting plate (AA) using the two mounting

screws (CC).

Mounting the light xture

□ Slide the rear of the light xture (B) onto the mounting

plate (AA) until it snaps into place.

□ Secure the xture in place on the mounting plate using the

mounting bolts (EE).