Instructions / Assembly

7 HOMEDEPOT.COM

Please contact 1-866-308-3976 for further assistance.

Installation (continued)

Caulking around the light

fixture

Ƒ Caulk around the mounting plate (D) and

mounting surface with silicone sealant (not

included).

Operation

Adjusting the lamp heads

Ƒ Turn the power on at the circuit breaker or fuse

and turn on the wall switch.

Ƒ If needed, gently grasp the lamp heads (A) and

tilt or rotate them to adjust the light coverage

area.

Setting the sensor for testing

NOTE: When the “LUX” control is set to the “ + ” position,

the light xture will operate during the day or night. When

the “TIME” control is set to the “ – “ position, the light will

stay on for 10 seconds after all motion is stopped.

Ƒ Grasp the motion sensor (C) housing and rotate

right or left to access the controls.

Ƒ Set the “LUX” control to the “ + ” position.

Ƒ Set the “TIME” control to the “ – ”

position.

Ƒ Slide the “SENS” control to the “ – ”

position.

NOTE: The motion sensor will need to completely warm

up (60 seconds) before beginning the setup process.

+–

LUX

+–

SENS

+–

TIME