Instructions / Assembly

7 HOMEDEPOT.COM

Please contact 1-866-308-3976 for further assistance.

Installation (continued)

Mounting the light fixture

NOTICE: The two pins on the rear of the light xture must be

inserted into the terminal block for the light to work.

□ Align the top edge of the light xture (B) with

the top edge of the mounting plate(D). Tilt the

light xture (B) toward the mounting plate (D),

making sure the light xture (B) is centered on

the mounting plate (D).

□ Tighten the large mounting bolt (EE) securely

through the center of the mounting plate(D). Do

not overtighten.

□ Push the rubber plug (AA) rmly into the

mounting bolt hole on the light xture (B).

NOTICE: When attaching this light to an external, surface mount

junction box, caulk around the inside of the light xture (B) before

attaching to the mounting plate (D).

Caulking around the light

fixture

IMPORTANT: Failure to completely caulk around the gasket (HH)

and the mounting plate (D) could lead to water damage and is not

covered under warranty.

□ Caulk around the gasket (HH) and mounting

surface with silicone sealant (not included).

□ Caulk around the mounting plate (D) and

gasket (HH) with silicone sealant (not

included).