Instructions / Assembly

8
2
Adjusting the Sensor Head
□ The motion sensor gets a full 180° of coverage, so it senses from wall to wall. However, if the sensor is
mounted on a corner and you would like additional coverage on one side or the other, the sensor (D) can
be rotated left and right.
Operation (continued)
3
Adjusting the Control Settings
ECO
0
0FF - Select ‘0’ to completely switch off the device.
15 S - This is the normal AUTOMATIC motion sensing
mode. The lights will stay as long as unit detects
motion. After the unit no longer senses motion, it will
turn off after 15 seconds. Any re-triggers will extend
the time for another 15 seconds.
XTEN - The lights will stay on at 100% brightness for
12 seconds and then drop to about 20% for another
48 seconds, if it no longer detects motion. If motion is
detected again, the lights will go back up to 100% for
12 seconds and then drop to about 20% for 48 more
seconds. Any re-trigger will extend the on time for the
same period.
ECO - This is energy saving mode. The light will come
on at 70% brightness and stay on as long as motion is
detected. After the unit no longer senses motion, it will
turn off after 12 seconds. Any re-triggers will extend
the time for another 12 seconds. This setting will
extend your battery life by up to 30%.
DUSK LEARN
Your motion sensor light is factory preset to only
work after dusk. For most people, this will be the
best setting and you will not need to make any
adjustment.
However, if desired, you can set your own “dusk”
level; which will determine how dark it needs to be
before the motion sensor works.
□ Press the DUSK LEARN button once to recalibrate
the dusk level to the current light level. The LED
lights will blink once to let you know that it has reset
the dusk level. The motion sensor will now activate
at this light level from now on. This is useful, if you
want the sensor to activate the LED lights in lighter
conditions; like in a garage or basement, or inside a
shed where it may not be totally dark, but you would
like to have the extra light to see better.
□ To return the default factory setting, press the
DUSK LEARN button twice within 2 seconds. The
lights will blink twice to indicate that you have
returned to default factory setting.
Adjusting The Selector Switch
Adjusting The DUSK LEARN
(DUSK LEARN)