Installation Guide

Installation (continued)

Mounting the light fixture

□ Align the xture (B) with the mounting plate (FF).

And then tighten the mounting bolt (EE) securely

through the center of the mounting plate (FF).

Do not over tighten.

□ Push the rubber plug (AA) rmly into the

mounting bolt hole on the light xture (B).

Caulking around the light

fixture

□ Caulk around the light xture base (B) and

mounting surface with silicone sealant (not

included).

NOTICE: When attaching this light to an external, surface mount

junction box, caulk around the inside of the light xture (B) before

attaching to the light xture (B).

IMPORTANT: Failure to completely caulk around the light xture

base (B) could lead to water damage and is not covered under warranty.