Installation Guide

9
Care and Cleaning
□
□
□
Troubleshooting
Problem Possible Cause Solution
The light will not come on. □ The light switch is turned off. □ Turn the light switch on.
□ The fuse is blown or the circuit breaker
is turned off.
□ Replace the fuse or turn the
circuit breaker on.
□ Daylight turn-off (photocell) is in effect. □ Recheck after dark.
□ The circuit wiring is incorrect (if this is
a new installation).
□ Verify the wiring is correct.
□ The motion sensor is aimed in the
wrong direction.
□ Re-aim the motion sensor
to cover the desired area.
The light comes on during the
day.
□ The motion sensor may be installed in a
relatively dark location.
□
normally under these
circumstances.
□ The “Test / Timer” control is in the
“Test” position.
□ Set the “TIMER MINUTES”
control to a timed setting.
The light comes on for no
apparent reason.
□ The motion sensor may be sensing
other heat sources.
□ Decrease the “SENSITIVITY”
setting or reposition the
motion sensor.
□ The “SENSITIVITY” control is set too
high.
□ Decrease the “SENSITIVITY”
setting.
□ The outside temperature is much
warmer or cooler than a person’s body
heat (summer or winter).
□ Decrease the “SENSITIVITY”
setting.
□
dimmer or timer.
□ Do not use a dimmer or
timer to control the light
or timer with a standard on/
off wall switch.
HOMEDEPOT.COM
Please contact 1-866-308-3976 for further assistance.