Use and Care Manual

ManualsBrandsDefiant ManualsDoors & WindowsUniversal Garage Door Key Chain Remote with Visor Clip

LOCKING THE EASY CLIP™



3. Press and lock the Easy Clip™ (1) by snapping it together.

4. Using the crimper tool (C), press down on the Easy Clip™ (1) cover until you hear

a “click.”

5. Press the green push button (3) to ensure that the garage door opens.

6. The garage door can now be controlled with the remote control.

NOTE: ™ (1).

Section 1 - Installing the Smart Button Receiver - When Existing Wall Button Wires are Exposed

CONNECTING THE EASY CLIP™



1. Open up the Easy Clip™ (1) on the Smart Button™ (A) and place it underneath the

existing wall button/wall console.

2. Ensure the garage button wires (2) are placed properly inside the channels of the

Easy Clip™ (1).

PACKAGE CONTENTS

Part Description Quantity

A Smart Button™ 1

B 3-Button Remote Control 1

C Crimper Tool 1

D Double-Sided Tape 1

E Holster 1

F Visor Clip 1

THANK YOU

of this universal garage door remote control. We strive to continually create quality products

designed to enhance your home. Visit us online to see our full line of products available for

USE AND CARE GUIDE

UNIVERSAL GARAGE DOOR REMOTE CONTROL

Safety Information

WARNING: Do not let children use the garage door transmitter without adult supervision.

WARNING: Unplug the power cord of your garage door opener before you begin installation to

ensure that the power is not connected.

WARNING: Do not use the remote to control the door without the safety beams.

Item #1000-024-359

Warranty

ONE YEAR WARRANTY

This product is guaranteed to be free of defects in materials and workmanship for 1

year from the date of purchase. If this product is defective, call 866-308-3976 for repair

or replacement parts or return the product to the store from which it was purchased.

Guarantee does not include normal wear and tear or batteries.

Contact the Customer Service Team at 1-866-308-3976 or visit www.homedepot.com

Questions, problems, missing parts? Before returning to the store,

8 a.m.-6 p.m., EST, Monday-Friday

1-800-308-3976

HOMEDEPOT.COM

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) This device

must accept any interference received, including interference that may cause undesired

operation.

WARNING:

responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on.

The user is encouraged to try to correct the interference by one or more of the

following measures:



Reorient or relocate the receiving antenna.



Increase the seperation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.



Consult the dealer or an experienced radio/TV technician for help.

Section 2

INSTALLING THE SMART BUTTON RECEIVER IF THE GARAGE

BUTTON WIRES ARE NOT EXPOSED

1. Open up the Easy Clip™ (1) on the Smart Button™ (A) and place it under the

existing ribbon wires connected to your garage door opener’s push button

terminal (2).

2. Ensure the ribbon wires are placed properly inside the channels of the Easy Clip™

(1).

3. Press and lock the Easy Clip

(1) by snapping it together with the enclosed

crimper tool (C).

4. Use double sided tape (D) to attach the Smart Button (A) to the garage door

opener. DO NOT drill holes onto the opener in order to attach the Smart Button (A).

5. The garage door can now be controlled with the remote control.

NOTE: Do not cut the antenna. Place the antenna straight up to improve reception.

NOTE: If the existing wall button wires are hidden inside the wall, please connect the Smart

Button

(A) to the exposed wires attached to the terminals of the garage door opener.

Section 3

INSTALLING THE SMART BUTTON IF EASY CLIP CANNOT BE

CONNECTED ON THE EXPOSED WIRES ABOVE YOUR GARAGE

OPENER WALL BUTTON

1. Disconnect the existing wall button (1) from the wall.

2. Pick one wire from the Smart Button™ (A) and connect it to one of the screw

terminals (1) on your wall button. Polarity does not matter.

3. Connect the second wire to the other screw terminal.

4. Reconnect the wall button.

5. The garage door can now be controlled with the remote control.

NOTE: If the Easy Clip

cannot clip the wires from your wall button, cut off the Easy Clip

then strip the end of wires enough to make the connections to the screw terminals (1) on

the wall button.

NOTE: The 3-button remote control (B) is pre-packaged in the holster with a silver

visor clip. To use the remote as a keychain, only slide the holster off.

NOTE: Proceed to section 2 or 3 to install your Smart Button if the garage button wires are not exposed.

WARNING: Unplug the power cord of your garage door opener before installation to ensure the

power is not connected.

Summary of content (2 pages)

PAGE 1
Item #1000-024-359 Safety Information Section 1 - Installing the Smart Button Receiver - When Existing Wall Button Wires are Exposed NOTE: Proceed to section 2 or 3 to install your Smart Button if the garage button wires are not exposed. WARNING: Do not let children use the garage door transmitter without adult supervision. CONNECTING THE EASY CLIP™ USE AND CARE GUIDE   WARNING: Unplug the power cord of your garage door opener before you begin installation to ensure that the power is not connected.
PAGE 2
Section 4 Section 6 Section 5 PROGRAMMING THE REMOTE CONTROL ERASING A REMOTE CONTROL FROM THE SMART BUTTON NOTE: The remote control (B) comes with a lithium battery already installed. Remove the battery isolater tag from the remote contol (B) before programming. NOTE: You must program your remote control (B) to the Smart Button™ (A) in order for the two to communicate.