User Manual

1110

GO SWISSDRIVE

The date and the time can be adjusted in the conguration menu under “Date and

time” (1).

To enter the data, call up the conguration menu by pressing the Scroll key until the

conguration screen appears. Continue by navigating with the +/–keys of the handle-

bar remote to the button “Date and time“ and then press the Conrm key.

Now you can make the entries for hour, minute, day, month and year by navigating

with the +/–keys to the respective buttons and by pressing the Conrm key sub-

sequently. Now you can increase or reduce the respective value with the +/–keys.

Finish by pressing the Conrm key.

The preferred language can also be selected in the conguration menu. To enter the

data, call up the conguration menu by pressing the Scroll key until the conguration

screen appears. Continue by navigating with the +/–keys of the handlebar remote to

the button “System settings“ and then press the Conrm key. Continue by navigating

with the +/–keys to the desired language and then press the Conrm key again.

 3. KEY FUNCTIONS OF THE HANDLEBAR

REMOTE

Your Evo control unit is controlled by the handlebar remote, which can be mounted

on the right or left side of the handlebars close to the grips. The handlebar remote (2)

has ve keys. Their functions are described in short in the following.

On/Off key (3): With the On/Off key (and with any other key) you activate the entire

GO SwissDrive system. By pressing the On/Off key long you can turn off the system.

The display should be activated shortly after you press this key and the entire system

should be ready for use. By pressing once again the On/Off key somewhat longer the

system is switched off.

Conrm key (4): With the Conrm key you can activate and disable various functions

in the menu of your Evo control unit and select and conrm settings in the congura-

tion menu. The function of the Conrm key hereby depends on the currently shown

menu.

1. Function in the main menu: If your pedelec/e-bike has a compatible lighting

system, you can switch on and off the lighting by pressing long on the Conrm

key in the main menu.

With the lighting switched on you can, in addition, select between manual mode,

automatic mode and full beam by pressing the Conrm key shortly. In the au-

tomatic mode the lighting is controlled via a brightness sensor integrated into the

display.

2. Function in the tour data menu: In the tour data menu you can clear the tour

data manually by pressing the Conrm key long.

Keep in mind that the tour data recorded until then will be deleted irre-

vocably.