Use and Care Manual

11 HOMEDEPOT.com
Please contact 1-866-308-3976 for further assistance.
Problem Possible Cause Solution
The lights stay on
continuously.
□ A lamp is positioned too close to the motion
sensor or pointed at nearby objects that
cause heat to trigger the motion sensor.
□ The motion sensor may be picking up a heat
source like an air vent, dryer vent, or brightly
painted, heat-reflective surface.
□ The motion sensor is in manual mode.
□ The light fixture is on the same circuit as a
motor, transformer, or fluorescent bulb.
□ Reposition the lamp
away from the motion
sensor or nearby
objects.
□ Turn the light switch
that operates the
fixture Off and back On
again within 0.2 to 1.5
seconds.
□ Install the light fixture
on a circuit without
motors, transformers, or
fluorescent bulbs.
The lights flash on and off.
□ Heat or light from the lamp head may be
turning the motion sensor On and Off.
□ Heat is being reflected from other objects
and may be turning the motion sensor on
and off.
□ The motion sensor is in “TEST” mode and
warming up.
□ Reposition the lamp
head away from the
motion sensor.
□ Reposition the motion
sensor.
□ Flashing is normal
under these conditions.
Troubleshooting (continued)
161222-IQA-US-RS-2701-FA-ENG(REV17).indd 11 22-Dec-16 8:55:17 AM