Use and Care Manual
3 HOMEDEPOT.com
Please contact 1-866-308-3976 for further assistance.
Phillips
screwdriver
Flathead
screwdriver
Pliers
Wire strippers/
cutters
Circuit tester Work gloves
Electrical tape Silicone sealant Ladder
Safety goggles
Specications
Pre-Installation
PLANNING INSTALLATION
Before installing the motion sensor, ensure that all parts are present (see Hardware Included on page 4). If any part
is missing or damaged, do not attempt to assemble, install, or operate this light fixture.
Estimated installation time: 30 minutes
TOOLS REQUIRED
Detection Range Up to 70 ft. (21m) - Varies with surrounding temperature
Sensing angle Up to 270°
Time delay 1, 5 or 10 minutes
HI-LO timer OFF, Dusk-to-Dawn, Seasonally adjusted timer mode
Operating modes Auto, Manual, Eco, Smart
Lamp Type Wattage
Lamp Load 300W (Max)
161222-IQA-US-RS-2701-FA-ENG(REV17).indd 3 22-Dec-16 8:55:14 AM