Use and Care Manual

6
Installation (continued)
□ Replace the gasket for your light fixture, if the
existing one is worn out or damaged.
□ Caulk around the canopy (B) and the mounting
surface with silicone sealant (not included).
Operation
1
Lamp Adjustment
2
Sensor Head Adjustment
□ Rotate the motion sensor (A) so the controls face toward the ground.
□ The sensor can be tilted down 110°, as well as rotated 80° left and 80° right.
□ Follow the instructions that came with your light
fixture for mounting and adjusting the light fixture.
□ Keep regular lamps at least 1 in. (25mm) from the
sensor. Halogen lamps should be kept at least 2 in.
(51mm) from the sensor.
B
2
Caulking Around the Light Fixture
Left 80˚ Right 80˚
A
Down 110˚
A
161222-IQA-US-RS-2701-FA-ENG(REV17).indd 6 22-Dec-16 8:55:16 AM