Use and Care Manual

Operation (continued)

Adjust the Dusk Learn

If desired, you can set the level of darkness at which the sensor

becomes active and at which the HI-LO feature comes on in the

“LO” accent mode.

□ Press once: To learn the current level of darkness and

set this as your new “Dusk” level.

□ Press twice within 5 seconds: Back to factory default

setting (+/- 5 LUX)

□ Press and hold the button more than 5 seconds:

The unit will enter or exit the permanent TEST mode

(Store ﬁxture test mode).

□ Lamp ﬂashes 3 times = Store test mode

□ Lamp ﬂashes 1 time = Back to normal function

DUSK

LEARN

HI level security lighting and LO level accent lighting.

Adjusting the HI/LO Light Level

HI-LO feature is off. Works with motion sensor after

dark at 100% brightness.

Dusk-to-dawn timer:

Lights will come on automatically at dusk at

approximately 25% brightness and stay on until

dawn. Lights will come on at 100% brightness when

motion is detected after dark. At dawn, the lights will

shut off completely.

NOTE: If the light or bulbs are not dimmable, the HI-LO

function will automatically be turned off by the sensor,

even if the knob is turned to one of the HI-LO settings.

This replacement motion sensor may not be suitable for all

light ﬁxtures in the market, such as metal halide or high

pressure sodium lights.

(Timer Mode):

The “Seasonally Adjusted Timer” will turn on the

lights at 25% brightness at dusk and then turn them

off in the middle of the night hours. This is calculated

automatically by the sensor. The lights will come on

at 100% brightness when the sensor detects motion

after dark.

O

HI - LO

161222-IQA-US-RS-2701-FA-ENG(REV17).indd 8 22-Dec-16 8:55:17 AM