Use and Care Manual

9 HOMEDEPOT.com
Please contact 1-866-308-3976 for further assistance.
7
Adjusting the Time
ECO mode:
□ The motion sensor lighting is set to minimize power
usage. Lights turn on with motion for 10 seconds and
continue to stay on as long as motion is detected.
Lights will dim to warn that lights will be shutting off
soon.
8
Using Manual Override Mode
□ To manually turn the lights “ON”, turn the light
switch OFF and back ON again between 0.2
seconds to 1.5 seconds.
□ To cancel the manual override mode, turn the
light switch OFF and back ON again between 0.2
seconds to 1.5 seconds.
NOTE: If the power to the light fixture is off for more
than 5 seconds, allow the motion sensor to warm up prior
to switching to manual mode.
SMART mode:
□ The sensor learns from your behavior to automatically
adjust the time.
For example, after multiple detections in a short
period, motion sensor automatically extends to the
maximum time.
ON-TIME:
□ 1 min, 5 min, or 10 min. Lights stay for the time set,
after motion is no longer detected.
Manual mode overrides the motion sensor and “ON-TIME”
control so the lights will operate in “ON” mode at full
brightness. This feature only works at night for 6 hours.
The motion sensor will reset to motion sensing mode.
Manual mode can be toggled on and off using a wall switch.
1min
10
TIME
5
Smart
Eco
Turn the light switch Off and back On
again within 0.2 to 1.5 seconds.
OFF
ON
OFF
ON
Operation (continued)
161222-IQA-US-RS-2701-FA-ENG(REV17).indd 9 22-Dec-16 8:55:17 AM