MSDS

4-3
LIDE
A
(
HONGKONG
)
INDUSTRIAL LIMITED.
LIDE
A
○
R
 To store batteries, keep out of high temperature and high humidity, and avoid dew
condensation.
 Keep away from direct sunlight and rain water.
 Pay attention to avoid short-circuit of batteries by collapse of packages.
 During transportation, avoid rough handing which cause dent or deformation.
 When piling up the outer packages of batteries, the number of tiers should be limited to the amount
indicated on the outer package.
4. Waste Disposal Method:
Do as the government regulations. The more importance is that all “EUNICE” lithium-manganese batteries
are pollution-free clean power. As a non-hazardous waste and are safe for disposal in the normal municipal
waste stream.
Section Ⅶ –Other Information
1. UL Test
Items Conditions Requirements
Heat endurance
test
Cells are kept stored for 24hrs. at :
temperature
80±2 , humidity 70%RH and less.℃
Open-circuit voltage is to be kept
same as initial value. No abnormal
appearance and no substandard
dimensions are to be observed.
Vibration
endurance test
Entire amplitude : 1.0mm
Frequency : 10~55~10Hz
Sweep : 1minute
Period : 2h×2(Direction X,Y)
Ditto
Falling
endurance test
Cells are fallen 10 times from the height
of 75cm onto solid wood with thickness
of 3cm without fixing falling angle.
Ditto
Weighing
endurance test
Weight of 2kg is laid for 1hour and 1kg
for 24hour respectively on all over
negative side of cells.
Ditto
Short-circuit test Cells are Short-circuited for 48hours. No burst and firing will occur.