Instructions / Assembly
7 HOMEDEPOT.COM
Please contact 844-212-0200 for further assistance.
Installation (continued)
UNDERSTANDING THE BATTERY AND AC ADAPTOR ICON
Battery Icons:
Full -
High -
Middle
-
Low -
Battery icon shows when the AC power supply is unplugged or interrupted.
9V battery functions as BACK-UP only and the Low symbol means LOW BATTERY.
The LCD backlight ashes YELLOW for 30 seconds and the Low battery icon will blink until the new
battery is replaced or the main power supply (with AC adaptor) is plugged in.
AC Adaptor Icon When the AC adaptor to the Smart Panel is connected to a wall socket, the AC adaptor icon
appears. The backlight will be ON for 10 seconds while the AC adaptor connects to the power
supply.
Programming your PIN Number
The Wireless Home Protection Smart Panel is supplied with a default PIN of “1234”. This can be changed to your own personalized PIN, or
you can change your PIN, as follows:
Step Procedure Example
1 Ensure you are in STANDBY mode by entering the
default PIN of 1 2 3 4 and pressing the Enter
button.
The Smart Panel displays this image when in STANDY mode. One beep
indicates that you entered a valid PIN. Three beeps indicate that an
invalid operation was performed.
2 Enter the default PIN of 1 2 3 4. Press the Enter
button.
The Smart Panel displays this image:
3
Press followed by the 1 button to set the
new PIN.
The Smart Panel displays this image:
4 When the LCD display ashes with a “1”, enter
your new 4-digit PIN and press the Enter button
to conrm.
5 When the LCD display ashes with a “2”, re-enter
your new 4-digit PIN and press the Enter button
to conrm. One beep indicates a valid PIN. Two
beeps indicate an invalid PIN.