Instructions / Assembly
THANK YOU
We appreciate the trust and condence you have placed in Deant through the purchase
of this Door or Window Alarm. We strive to continually create quality products designed to
enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Deant!
USE AND CARE GUIDE
Door or Window Alarm
Safety Information
Save these instructions for future use.
WARNING: Any battery may leak harmful chemicals which
may damage skin, clothing or the inside of the alarm.
TO AVOID RISK OF INJURY, DO NOT LET ANY MATERIAL LEAKED
FROM A BATTERY COME IN CONTACT WITH EYES OR SKIN. Any
battery may rupture or explode if put in a re or otherwise
exposed to excessive heat.
TO AVOID RISK OF INJURY, DO NOT EXPOSE BATTERIES TO
EXCESSIVE HEAT.
To reduce the risk of personal injury or harm to your alarm, take
the following precautions:
Do not use different brands of batteries in the same alarm
When replacing batteries always replace the whole set
Do not use rechargeable or reusable batteries
Do not allow children to install batteries unsupervised
Follow battery manufacturer’s instructions as to proper
handling, storage and disposal of batteries
WARNING: FOR INDOOR USE ONLY. RISK OF PERSONAL
INJURY. PROLONGED EXPOSURE TO ALARM SIREN MAY CAUSE
PERMANENT HEARING LOSS. THIS PRODUCT CANNOT BE LINKED
TO A MONITORED SECURITY SYSTEM. THE SECURITY FEATURE
IS EXCLUSIVELY THE 120DB ALARM SOUND. DEFIANT IS NOT
RESPONSIBLE OR LIABLE FOR ANY DAMAGE, VANDALISM, THEFT
OR OTHER ACTIONS THAT MAY OCCUR WHILE THIS PRODUCT
IS IN USE.
PRODUCT DESCRIPTION
The door or window alarm is designed to sound an intruder alarm or visitor
chime when a door or window is opened. Toggle the switch in the battery
compartment between the different modes or switch off when not required.
PACKAGE CONTENTS
A
B
C
Part Description Quantity
A Magnetic window/door alarm 1
B Double-sided mounting tape set 1
C LR44 Alkaline battery 4
Installation and Operation
1
Installing and replacing batteries
Slide the battery compartment cover off.
Upon initial use, carefully remove the clear plastic insulation tab
from the batteries. If the batteries are dislodged, replace them
noting the polarity diagram inside the battery compartment. If
replacing batteries, replace with 4 LR44 alkaline batteries.
Replace the battery compartment cover.
It is recommended that the alarm power is regularly tested by
pressing the battery test button in the battery compartment. If the light
illuminates, the batteries are in good condition. If it fails to illuminate,
replace all batteries.
2
Installing the alarm and sensor
Clean the surfaces you want to mount the alarm on using cleaning
alcohol or similar. Ensure the surfaces are completely clean and dry
before proceeding.
Use the double-sided tape (B) to mount the alarm and magnetic
sensor on the door or window to be protected, placing one of the
units on the part of the xture which opens and the other on the
stationary part of the xture (frame).
Ensure that when the door or window is closed, the arrows on the
alarm and magnet are aligned with less than 15 mm between them.
Item # 1001-090-100
Model # THD-DW
Warranty
1 YEAR LIMITED WARRANTY
This product is guaranteed to be free of defects in materials and
workmanship for 1 year from the date of purchase. If this product is
defective, call 844-212-0200 for repair or replacement parts or return the
product to the store from which it was purchased.
Guarantee does not include normal wear and tear, bulbs or batteries.
Contact the Customer Service Team or visit www.HOMEDEPOT.COM.
Questions, problems, missing parts? Before returning to the store,
call Customer Service
8 a.m. - 4:30 p.m., CST, Monday - Friday
844-212-0200
HOMEDEPOT.COM
Installation and Operation (continued)
3
Set the alarm to alarm mode
Toggle the CHIME/OFF/ALARM switch to the ALARM position. When
the door or window opens (causing the alarm and magnet to
separate by more than 15 mm), the alarm will sound continuously
until the door or window is shut or the unit is disarmed.
4
Setting the alarm to chime mode
Toggle the CHIME/OFF/ALARM switch to the CHIME position. When
the door or window is opened (causing the alarm and magnet to
separate by more than 15 mm), the chime will sound.
5
Disarming the unit
Toggle the CHIME/OFF/ALARM switch to the OFF position. When
the door or window is opened (causing the alarm and magnet to
separate by more than 15 mm), the unit will make no sound.
Battery Compartment
Battery Indicator