Use and Care Guide

Installation (continued)

NOTE: Hie push button and doorbell come synced from tiie

factory. ITie range of the wireless doorbell can vary with

location, temperature, and battery condition.

3 Testing the push button and

doorbell

nA NOTE: Do not permanently mount ttie push button until L3 ttie push

button and doortell are worldng properly.

□ Temporarily position the push button (B) where it will

be mounted.

□ Press the push button (B) to verify the doorbell (A)

and push button (B) work properly.

Mounting the push button

NOTE: Remove material in screw holes (if needed) before

mounting with screws.

Use either screws (AA) or double-sided tape (BB) to mount the

push button (B).

□ To mount with screws (AA), remove the back of the push

button (B) by pushing in the tab on the bottom with a

small screwdriver and twisting it. Place the push button

back on the doorjamb and mark the two screw holes.

Drill two 1/16 in. pilot holes. Attach with screws (AA) and

snap on the front of the push button (B).

Operation

□ If the doorbell (A) does not sound, move the

doorbell (A) closer to the push button (B) and

test again.

□ When attaching the push button (B) with double-sided

tape (BB), remove the paper from both sides of the

double-sided tape (BB) and apply to a clean surface.

1 Downloading the Hubspace™

叩

Download the Hubspace™ app from theApp Store or the

Google Play Store.

Download

on the

App Store

GET IT ON

Google Play

5 HOMEDEPOT.CA/HUBSPACE

Please contact 1-877-592-5233 for further assistance.