Use and Care Guide

Operation (continued)
2 Connecting the doorbell to the
Hubspace™ app
You must have a 2.4GHz network to connect the doorbell to
Wi-Fi.
□ Have the network password available.
□ Create a Hubspace™ account and sign in or login if you
already have an account.
□ Tap the
u
+" icon in the upper right corner on the app
screen.
□ Scan the QR code from the packaging provided.
□ Follow the on-screen instructions.
3 Understanding the LED indicator
lights
BLUE LED RED LED DEVICE STATE
WHEN ARE THESE LIGHTS DISPLAYED
BLUE-Off
RED-Solid (NO flashing)
Booting up or Wi-Fi error.
Until connected to Wi-Fi or until connected to the
cloud. This state may not be visible because unit
will immediately transition to
K
Not Connected”.
BLUE-Off RED - Slow flashing Not connected
Until connecting to the cloud is completed or
times out.
BLUE-Off RED - Rapid flashing
“Setup Mode”-Connecting to
the cloud.
Until connecting to the cloud is completed or
times out.
BLUE-Rapid
flashing
RED-Off
Connecting to the cloud -
Previously connected to the
cloud but currently NOT
connected to Wi-Fi.
Until connected to the cloud through Wi-Fi.
BLUE-Solid (NO
flashing)
RED-Off
Connected to the cloud and
currently connected to Wi-Fi.
While connected to the cloud and connected to
Wi-Fi.
BLUE-Off RED-Off Not connected
Doorbell is not connected to the Wi-Fi or cloud
after 20 minutes.
PURPLE-Solid (NO flashing)
Push button activation
The LEDs will light for 10 seconds after a push
button is pressed. This will happen whether the
doorbell is muted or not.
6