Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- What you can do with this unit
- Accessories
- Part names and functions
- Positioning
- Connections
- Connecting a TV
- Connection 1: TV equipped with an HDMI connector and compatible with the eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel)
- Connection 2: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an optical digital connector
- Connection 3: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an analog connector
- Connecting a playback device
- Connecting the power cords
- Connecting a TV
- Playback
- Settings
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Trouble teaching this unit remote control commands
- No sound comes out
- Music cuts out or delays sometimes
- The HDMI Control function does not work
- Audio can be heard coming from the TV’s speakers
- I hear a delay when using the external input with my TV
- Bluetooth playback does not work
- Cannot connect the sound bar to the network
- Connecting to a network using an iOS device
- Connecting to a WPS network
- This unit takes long time to turn on
- Resetting factory settings
- Resetting the firmware to the default state
- Appendix
- Setup Guide
o
Visual indicator LEDs
Indicates input source, sound bar volume, night mode, dialogue, subwoofer volume and sound modes.
.
n
Input source indication
Input sources are indicated as follows. When the input source
is TV, HDMI Input, or Optical Input, the color changes
depending on the type of audio signal that is input.
.
TV
AUX Input
Bluetooth
HEOS Music
(PCM)
(Dolby)
(DTS)
HDMI Input
(PCM)
(Dolby)
(DTS)
Optical Input
(PCM)
(Dolby)
(DTS)
0
Refer to “Enjoying TV, movies and music” (v p. 28) for how to set the
input source.
n
Volume level indication
Volume level will be indicated with 5 LEDs. Each LED will have
5 levels of brightness to indicate volume. Volume 1% will be
indicated with the left most volume dimly lit, volume 100% will
be indicated with all 5 volume LEDs fully illuminated.
.
Volume indicators will illuminate in purple instead of white to
indicate the state of Night Mode.
.
Night Mode:On Night Mode:Off
0
Refer to “Adjusting the volume” (v p. 29) for how to adjust the
volume.
0
Refer to “Setting the night mode” (v p. 51) for how to set the night
mode.
Contents Connections Playback Settings Tips Appendix
13