Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- What you can do with this unit
- Accessories
- Part names and functions
- Positioning
- Connections
- Connecting a TV
- Connection 1: TV equipped with an HDMI connector and compatible with the eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel)
- Connection 2: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an optical digital connector
- Connection 3: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an analog connector
- Connecting a playback device
- Connecting the power cords
- Connecting a TV
- Playback
- Settings
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Trouble teaching this unit remote control commands
- No sound comes out
- Music cuts out or delays sometimes
- The HDMI Control function does not work
- Audio can be heard coming from the TV’s speakers
- I hear a delay when using the external input with my TV
- Bluetooth playback does not work
- Cannot connect the sound bar to the network
- Connecting to a network using an iOS device
- Connecting to a WPS network
- This unit takes long time to turn on
- Resetting factory settings
- Resetting the firmware to the default state
- Appendix
- Setup Guide
n
Dialogue indication
Depending on the settings of the dialogue function for
adjustment of the volume of dialogue in movies and vocals in
music, the indication is as follows.
.
Off
Low
Mid
High
0
Refer to “Adjusting the dialogue sound” (v p. 51) for how to configure
the Dialogue settings.
n
Subwoofer volume indication
The volume of the subwoofer is indicated by 5 LEDs. The
default settings are ±0 and the center LED lights up. As the
subwoofer volume increases, the LEDs light up in order from
the center to the right. Conversely, as the subwoofer volume
decreases, the LEDs light up in order from the center to the
left.
.
Default
Value
Less
Subwoofer
Volume
More
Subwoofer
Volume
0
Refer to “Adjusting the subwoofer volume” (v p. 29) for how to adjust
the volume of the subwoofer.
n
Sound mode indication
The indication depends on the selected sound modes.
(v p. 53)
Contents
Connections Playback Settings Tips Appendix
14