Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- What you can do with this unit
- Accessories
- Part names and functions
- Positioning
- Connections
- Connecting a TV
- Connection 1: TV equipped with an HDMI connector and compatible with the eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel)
- Connection 2: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an optical digital connector
- Connection 3: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an analog connector
- Connecting a playback device
- Connecting the power cords
- Connecting a TV
- Playback
- Settings
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Trouble teaching this unit remote control commands
- No sound comes out
- Music cuts out or delays sometimes
- The HDMI Control function does not work
- Audio can be heard coming from the TV’s speakers
- I hear a delay when using the external input with my TV
- Bluetooth playback does not work
- Cannot connect the sound bar to the network
- Connecting to a network using an iOS device
- Connecting to a WPS network
- This unit takes long time to turn on
- Resetting factory settings
- Resetting the firmware to the default state
- Appendix
- Setup Guide
Subwoofer
o
Rear panel
A
Power inlet
Used to connect the power cord. (v p. 27)
B
SYNC LED
Displays subwoofer status. (v p. 76)
0
The sound bar and subwoofer are wirelessly connected as the factory default. If no
audio is output from the subwoofer, wirelessly connect the sound bar and
subwoofer again. (v p. 57)
C
SYNC button
Used to wirelessly connect the sound bar and subwoofer. (v p. 57)
D
POWER ON/OFF switch
Turns the subwoofer power on/off. (v p. 29)
q
r
e
w
Contents Connections Playback Settings Tips Appendix
16