Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- What you can do with this unit
- Accessories
- Part names and functions
- Positioning
- Connections
- Connecting a TV
- Connection 1: TV equipped with an HDMI connector and compatible with the eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel)
- Connection 2: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an optical digital connector
- Connection 3: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an analog connector
- Connecting a playback device
- Connecting the power cords
- Connecting a TV
- Playback
- Settings
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Trouble teaching this unit remote control commands
- No sound comes out
- Music cuts out or delays sometimes
- The HDMI Control function does not work
- Audio can be heard coming from the TV’s speakers
- I hear a delay when using the external input with my TV
- Bluetooth playback does not work
- Cannot connect the sound bar to the network
- Connecting to a network using an iOS device
- Connecting to a WPS network
- This unit takes long time to turn on
- Resetting factory settings
- Resetting the firmware to the default state
- Appendix
- Setup Guide
Turning on the power of the
subwoofer
1
Press POWER ON/OFF switch on the rear panel of
subwoofer to turn on power to the subwoofer.
The subwoofer automatically connects wirelessly to the
sound bar, and the SYNC LED on the back of the subwoofer
lights up in green.
0
If the SYNC LED continues to blink in green and cannot connect to the
sound bar, try reconnecting manually. (v p. 57)
Adjusting the volume
1
Use VOL + or VOL – to adjust the volume.
The Visual Indicator LEDs indicate the volume. (v p. 13)
Adjusting the subwoofer volume
1
Use SUBWOOFER + or SUBWOOFER – to adjust the
subwoofer volume.
The Visual Indicator LEDs indicate the volume of the
subwoofer. (v p. 14)
Turning off the sound temporarily
(Muting)
1
Press .
The status LED blinks slowly in blue.
0
To cancel mute, either adjust the sound volume or press again.
Contents Connections Playback Settings Tips Appendix
29