Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- What you can do with this unit
- Accessories
- Part names and functions
- Positioning
- Connections
- Connecting a TV
- Connection 1: TV equipped with an HDMI connector and compatible with the eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel)
- Connection 2: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an optical digital connector
- Connection 3: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an analog connector
- Connecting a playback device
- Connecting the power cords
- Connecting a TV
- Playback
- Settings
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Trouble teaching this unit remote control commands
- No sound comes out
- Music cuts out or delays sometimes
- The HDMI Control function does not work
- Audio can be heard coming from the TV’s speakers
- I hear a delay when using the external input with my TV
- Bluetooth playback does not work
- Cannot connect the sound bar to the network
- Connecting to a network using an iOS device
- Connecting to a WPS network
- This unit takes long time to turn on
- Resetting factory settings
- Resetting the firmware to the default state
- Appendix
- Setup Guide
Settings
Perform the below operations and settings as needed.
.
MUSIC
DIALOGUE
MOVIE
NIGHT
Adjusting the dialogue sound
Adjust the volume of dialogue in movies, vocals in music, etc. so
these can be heard more easily.
1
Press DIALOGUE.
Pressing the button switches between the following
settings, and the Visual Indicator LEDs light up. (v p. 14)
Off / Low / Medium / High (Default: Off)
Setting the night mode
Compresses the dynamic range (difference between loud and
soft sounds) to make audio easier to hear at low volumes.
1
Press NIGHT.
Pressing the button switches between on/off, and the
Visual Indicator LEDs light up in purple (on) or white (off).
(v p. 13)
0
The number of Visual Indicator LEDs that light up depends on the setting
of the volume level.
Contents Connections Playback Settings Tips Appendix
51