Owner's Manual

Operating this unit using the remote
control of a TV
There are three ways to operate this unit using the remote
control of a TV.
0
HDMI control function
Connect this unit to a TV that supports the HDMI control
function with an HDMI cable and enable the HDMI control
setting on the TV to perform basic operations on this unit
(changing the input source, turning the power on and off,
adjusting the volume) with the remote control of the TV.
Refer to “HDMI control function” for more information about
the HDMI control function. (v p. 67)
0
Remote control preset function
This unit is preset such that you can adjust the volume using
the volume adjustment button on the remote controls for the
televisions of major manufacturers. This is useful when the
television you are using does not support HDMI control, or
when you connect to a television that does not have an HDMI
connector.
0
Remote control learning function
If your TV does not support the HDMI control function and
Remote control preset function, use this unit’s remote control
learning function. This enables you to operate this unit with
the remote control of a TV. (“Using the remote control
learning function” (v p. 56))
o
Using the remote control learning function
Perform this operation on the HEOS App. Download the HEOS
App in advance to your iOS or Android device. (v p. 32)
1
Tap the Settings icon a located in the upper left
corner of the main “Music” menu.
The setting menu screen is displayed.
2
Select “My Devices” to display a list of your HEOS
built-in devices.
3
Select this unit.
4
Select “Remote Control”.
The setup below is not required when device control by
HDMI is active. (A check mark will be displayed by “HDMI
CEC” in this case)
5
Select “IR Control”.
6
Select a command of this unit you would like to
control by the remote control of your TV.
Follow the instructions on the screen to complete setup.
Contents
Connections Playback Settings Tips Appendix
56