Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- What you can do with this unit
- Accessories
- Part names and functions
- Positioning
- Connections
- Connecting a TV
- Connection 1: TV equipped with an HDMI connector and compatible with the eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel)
- Connection 2: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an optical digital connector
- Connection 3: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an analog connector
- Connecting a playback device
- Connecting the power cords
- Connecting a TV
- Playback
- Settings
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Trouble teaching this unit remote control commands
- No sound comes out
- Music cuts out or delays sometimes
- The HDMI Control function does not work
- Audio can be heard coming from the TV’s speakers
- I hear a delay when using the external input with my TV
- Bluetooth playback does not work
- Cannot connect the sound bar to the network
- Connecting to a network using an iOS device
- Connecting to a WPS network
- This unit takes long time to turn on
- Resetting factory settings
- Resetting the firmware to the default state
- Appendix
- Setup Guide
Trouble teaching this unit remote control commands
Trouble teaching this unit remote control commands.
0
Remember that while this unit can learn almost all IR (infrared) remote commands, there remain a few rare code formats that
cannot be taught.
No sound comes out
No sound comes out.
0
Check the connections for all devices. (v p. 22)
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check that a proper input source is selected. (v p. 28)
0
Adjust the volume. (v p. 29)
0
Make sure volume is not muted. (v p. 29)
No sound is produced from subwoofer.
0
Check whether the power of the subwoofer is turned on. (v p. 29)
0
When there is an obstacle between the sound bar and the subwoofer, remove it or place the subwoofer closer to the sound bar.
0
Make sure the SYNC LED on the subwoofer is lit in green. If lights are not lit, it may indicate that the sound bar and subwoofer are
not wirelessly connected. Connect the sound bar and subwoofer manually. (v p. 57)
0
When you are using more than one Studio 3D Mini, this unit may automatically connect to a different subwoofer than the one
supplied with it. To connect this unit to the subwoofer supplied with it, connect the unit manually. (v p. 57)
Contents
Connections Playback Settings Tips Appendix
60