Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- What you can do with this unit
- Accessories
- Part names and functions
- Positioning
- Connections
- Connecting a TV
- Connection 1: TV equipped with an HDMI connector and compatible with the eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel)
- Connection 2: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an optical digital connector
- Connection 3: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an analog connector
- Connecting a playback device
- Connecting the power cords
- Connecting a TV
- Playback
- Settings
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Trouble teaching this unit remote control commands
- No sound comes out
- Music cuts out or delays sometimes
- The HDMI Control function does not work
- Audio can be heard coming from the TV’s speakers
- I hear a delay when using the external input with my TV
- Bluetooth playback does not work
- Cannot connect the sound bar to the network
- Connecting to a network using an iOS device
- Connecting to a WPS network
- This unit takes long time to turn on
- Resetting factory settings
- Resetting the firmware to the default state
- Appendix
- Setup Guide
Connecting to a WPS network
Connecting to a WPS network.
0
If your wireless router support WPS (Wi-Fi Protected Setup™) this unit can optionally connect to your network using the push button
method by following these steps:
(Wi-Fi Protected Setup™ is trademarks of Wi-Fi Alliance.)
1.
Press the WPS button on your router.
2.
Within 2 minutes, press and hold the CONNECT button on the rear panel of the sound bar for 3 seconds.
3.
The status LED on the front of the sound bar will flash green for several seconds as it connects to your WPS router.
4.
When the connection is complete, the status LED on the front of the sound bar will turn solid green.
This unit takes long time to turn on
This unit takes long time to turn on.
0
In case this unit as in the deep standby mode, it may takes around 40 second to turn on.
Contents
Connections Playback Settings Tips Appendix
64