Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- What you can do with this unit
- Accessories
- Part names and functions
- Positioning
- Connections
- Connecting a TV
- Connection 1: TV equipped with an HDMI connector and compatible with the eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel)
- Connection 2: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an optical digital connector
- Connection 3: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an analog connector
- Connecting a playback device
- Connecting the power cords
- Connecting a TV
- Playback
- Settings
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Trouble teaching this unit remote control commands
- No sound comes out
- Music cuts out or delays sometimes
- The HDMI Control function does not work
- Audio can be heard coming from the TV’s speakers
- I hear a delay when using the external input with my TV
- Bluetooth playback does not work
- Cannot connect the sound bar to the network
- Connecting to a network using an iOS device
- Connecting to a WPS network
- This unit takes long time to turn on
- Resetting factory settings
- Resetting the firmware to the default state
- Appendix
- Setup Guide
o
Deep Standby
The device also has the ability to automatically enter “Deep
Standby” whenever the wired or wireless network connection
is removed for more than 60 minutes in quick start mode.
The front panel LED will turn off during Deep Standby. To
wake this unit from Deep Standby,
0
Press any button on the sound bar or the included remote
control unit.
0
Input audio signal to Optical.
0
CEC (Consumer Electronics Control) command over
HDMI/ARC
0
Use a TV remote control that has learned the operations of
this unit with the remote control learning function to
operate this unit. (v p. 56)
0
It may take around 40 seconds to wake up this unit from the deep
standby.
0
You also push the c button for 3 seconds, the device enters the
Deep Standby.
o
Off
To completely turn off the power to the device you must
remove the mains plug from the power outlet.
Contents
Connections Playback Settings Tips Appendix
69