Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- What you can do with this unit
- Accessories
- Part names and functions
- Positioning
- Connections
- Connecting a TV
- Connection 1: TV equipped with an HDMI connector and compatible with the eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel)
- Connection 2: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an optical digital connector
- Connection 3: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an analog connector
- Connecting a playback device
- Connecting the power cords
- Connecting a TV
- Playback
- Settings
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Trouble teaching this unit remote control commands
- No sound comes out
- Music cuts out or delays sometimes
- The HDMI Control function does not work
- Audio can be heard coming from the TV’s speakers
- I hear a delay when using the external input with my TV
- Bluetooth playback does not work
- Cannot connect the sound bar to the network
- Connecting to a network using an iOS device
- Connecting to a WPS network
- This unit takes long time to turn on
- Resetting factory settings
- Resetting the firmware to the default state
- Appendix
- Setup Guide
Status Front LED action Rear LED action Description
Error
.
(solid)
.
(solid)
There was a setup error. Check your usage environment,
then follow the correct procedure to try setup again. If the
error occurs again, restore factory settings and try setup
again. (v p. 65)
.
(fast blink)
.
(off)
There is a hardware error. Unplug the power cord, wait a
little while, then plug the power cord back in.
Reset
.
(fast blink)
.
(solid)
Factory settings have been restored.
Contents Connections Playback Settings Tips Appendix
75