Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- What you can do with this unit
- Accessories
- Part names and functions
- Positioning
- Connections
- Connecting a TV
- Connection 1: TV equipped with an HDMI connector and compatible with the eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel)
- Connection 2: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an optical digital connector
- Connection 3: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an analog connector
- Connecting a playback device
- Connecting the power cords
- Connecting a TV
- Playback
- Settings
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Trouble teaching this unit remote control commands
- No sound comes out
- Music cuts out or delays sometimes
- The HDMI Control function does not work
- Audio can be heard coming from the TV’s speakers
- I hear a delay when using the external input with my TV
- Bluetooth playback does not work
- Cannot connect the sound bar to the network
- Connecting to a network using an iOS device
- Connecting to a WPS network
- This unit takes long time to turn on
- Resetting factory settings
- Resetting the firmware to the default state
- Appendix
- Setup Guide
6
• Power - Turns the Studio 3D Mini on/off
• Source - Switches sound bar inputs
• Bluetooth - Initiates Bluetooth pairing
• Master Volume Down - Decreases the master volume
• Master Volume Up - Increases the master volume
Front of Studio 3D Mini
Sound Bar Controls
Status LED
- Shows current sound bar status.
(See pages 9 and 13.)
Visual Indicator LEDs
- Indicates sound bar volume, input source,
subwoofer volume, dialogue, night mode, and
sound modes. (See on page 8.)
1.Studio3DMini_QSG_ENG_00A_201006.indd 61.Studio3DMini_QSG_ENG_00A_201006.indd 6 2020/10/06 16:29:412020/10/06 16:29:41