Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- What you can do with this unit
- Accessories
- Part names and functions
- Positioning
- Connections
- Connecting a TV
- Connection 1: TV equipped with an HDMI connector and compatible with the eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel)
- Connection 2: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an optical digital connector
- Connection 3: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an analog connector
- Connecting a playback device
- Connecting the power cords
- Connecting a TV
- Playback
- Settings
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Trouble teaching this unit remote control commands
- No sound comes out
- Music cuts out or delays sometimes
- The HDMI Control function does not work
- Audio can be heard coming from the TV’s speakers
- I hear a delay when using the external input with my TV
- Bluetooth playback does not work
- Cannot connect the sound bar to the network
- Connecting to a network using an iOS device
- Connecting to a WPS network
- This unit takes long time to turn on
- Resetting factory settings
- Resetting the firmware to the default state
- Appendix
- Setup Guide
9
Volume Indication
Master Volume will be communicated with the
ve LEDs in the row of Visual Indicators LEDs.
Volume of 1% will be indicated by the leftmost
LED as dimly lit, and 100% will be indicated with
all 5 Visual Indicator LEDs fully illuminated.
Visual indicator LEDs will illuminate purple
when NIGHT MODE is active.
Mute will be indicated by the Status light.
Volume mute when Status LED is Blue and
slowly blinking.
1 2 3 4 5
Visual Indicator LEDs
NIGHT MODE - enabled
Status LED
1.Studio3DMini_QSG_ENG_00A_201006.indd 91.Studio3DMini_QSG_ENG_00A_201006.indd 9 2020/10/06 16:29:412020/10/06 16:29:41