Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- What you can do with this unit
- Accessories
- Part names and functions
- Positioning
- Connections
- Connecting a TV
- Connection 1: TV equipped with an HDMI connector and compatible with the eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel)
- Connection 2: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an optical digital connector
- Connection 3: TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an analog connector
- Connecting a playback device
- Connecting the power cords
- Connecting a TV
- Playback
- Settings
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Trouble teaching this unit remote control commands
- No sound comes out
- Music cuts out or delays sometimes
- The HDMI Control function does not work
- Audio can be heard coming from the TV’s speakers
- I hear a delay when using the external input with my TV
- Bluetooth playback does not work
- Cannot connect the sound bar to the network
- Connecting to a network using an iOS device
- Connecting to a WPS network
- This unit takes long time to turn on
- Resetting factory settings
- Resetting the firmware to the default state
- Appendix
- Setup Guide
13
NO SOUND COMING OUT FROM THE SUBWOOFER
- Ensure that your subwoofer is connected to power and switched ON.
- Check the SYNC LED at the back of the subwoofer. Make sure that it is solid green. If it is not green,
refer to the online manual for detailed instructions on how to manually reset the connection between
the sound bar and subwoofer.
RESETTING YOUR SOUND BAR
- Resetting your sound bar will clear out the wireless network settings, EQ, and name, but retain its
current software.
- You will have to use “Settings” - “Add Device” to reconnect the sound bar to your home network
before it can be used.
- To reset your sound bar, press and hold both the CONNECT button (located on the back panel of the
sound bar) and Bluetooth (
) button (located on the top panel of the sound bar) for 5 seconds until
the status LED on the front of the sound bar begins to ash amber.
Owner’s Manual
For more information, visit https://www.denitivetechnology.com/.
Refer to the Online Manual for other functions information and
operation procedure details.
manuals.denitivetechnology.com/Studio3Dmini/NA/EN/
1.Studio3DMini_QSG_ENG_00A_201006.indd 131.Studio3DMini_QSG_ENG_00A_201006.indd 13 2020/10/06 16:29:422020/10/06 16:29:42