Owner's Manual
Table Of Contents
Connecting Your
Mythos
Loudspeakers
Hooking
Up Your
Mythos
Loudspeakers
Your Mythos loudspeakers each have one pair
of
gold 5-way
binding posts. Normally, you will hook up the left main/front channel
red(
+) terminal
of
your receiver or amplifier to the red(+) terminal
of
your left Mythos loudspeaker and the left main/front channel black(-)
terminal
of
your receiver or amplifier to the black(-) terminal
of
your
left Mythos loudspeaker. Connect the right channel main/front
channel red(
+) terminal
of
your amplifier or receiver to the red(+)
terminal
of
your right Mythos loudspeaker and the black(-) terminal
of
the right main/front channel
of
your receiver or amplifier to the
black(-) terminal
of
your right Mythos loudspeaker.
If
you are using the Mythos
as
a center channel, connect the center
channel red(
+) terminal
of
your amplifier or receiver to the red(+)
terminal
of
your Mythos center channel speaker and the black (-)
terminal
of
the center channel
of
your receiver or amplifier to the
black(
-)
terminal
of
your Mythos center channel loudspeaker.
If
you are using the Mythos as side/rear surround speakers, hook up
the left surround red(
+) terminal
of
your receiver or amplifier
to
the
red(
+) terminal
of
your Mythos left surround speaker and the left sur-
round black(-) terminal
of
your receiver or amplifier to the black(-)
terminal
of
your Mythos left surround speaker. Connect the right sur-
round red(
+) terminal
of
your amplifier or receiver to the red(+) termi-
nal
of
your Mythos right surround loudspeaker and the black(
-)
termi-
nal
of
the right surround channel
of
your receiver or amplifier
to
the
black(
-)
terminal
of
your Mythos right surround loudspeaker.
If
your receiver/ decoder has a bass management system and you
are using a separate subwoofer, set bass management
to
"Small" left
and right main speakers, "Small" center channel, "Small" surround
speakers and "Yes" subwoofer.
If
your receiver/decoder has a choice
of
crossover frequencies, set the crossover to 80 Hz or 100 Hz if avail-
able (for greater dynamic range).
If
you are not using a separate sub-
woofer, set bass management to "Large" left and right main speakers,
"Large" center channel and "Large"surround speakers, and
"No"
sub-
woofer.
We
strongly recommend the use
of
a separate subwoofer.