Owner’s Manual SLIMLINE MULTIFUNCTION BUILT-IN OVEN CONTENTS 600 EMSG www.defy.co.
INTRODUCTION Congratulations on the purchase of this quality product. We trust that you will enjoy many years of trouble free use. Please read these instructions carefully before using the oven. This manual will provide you with information on how to operate and care for your product in order that you gain the maximum benefit from it. UNPACKING Please ensure that packaging material is disposed of in a responsible manner.
INSTALLATION • • • Insert the oven into the cupboard. Open the door to expose the fixing holes in the side trims. Secure the oven by 4 countersunk screws (fasteners are not supplied).
THE CONTROL PANEL AUTOMATIC OVEN TIMER AND CLOCK MULTIFUNCTION SELECTOR MULTIFUNCTION OVEN THERMOSTAT AND INDICATOR LIGHT 12:45 STOP SLIMLINE 600 E THERMOFAN THE OVEN THERMOSTAT IS MARKED TO 70°C.
Note: • During the operation of the minute minder, the remaining time may be displayed by pushing button 1 • The minute minder can be used simultaneously and independent of any automatic control program • The display will always revert to the time of day after any program has been set. - + 1 2 3 4 5 6 Switching the oven on and off automatically (Autobake) Autobake is intended for dishes such as roasts and casseroles. These are not affected by a waiting period in a cold oven.
Switching the oven off automatically Suppose you have to go out and you will not be back in time to switch off a meal already cooking in the oven and requiring another 40 minutes before it is done. Proceed as follows: • Press and hold button 2. The clock will display 00.00. 1 2 3 4 • Press button 6 until the clock displays 00.40. • Release the buttons and the clock will again display the time of day. - + 5 6 The word AUTO and will light up in the display.
MULTIFUNCTION OVEN STATIC OVEN FAN ONLY - NO HEAT 1 The fan blows ambient air over the frozen food to defrost it. 2 The rear bake element is used in conjunction with the fan. 3 TURBO GRILL THERMOFAN OVEN 4 Top heat and bottom bake elements are used. FAN ASSISTED OVEN 5 The top grill element is used in conjunction with the fan. Top heat and bottom bake elements are used in conjunction with the fan. GRILL 6 The top grill element only is used.
3 CONVENTIONAL OVEN (FAN ASSISTED) Set the multifunction selector to conventional oven fan assisted and the oven thermostat to the required temperature. The indicator light will glow and remain on until the oven has reached the selected temperature. • No preheating is necessary and the food can be placed in the oven immediately. • During cooking the indicator light will cycle on and off as the oven thermostat maintains the selected temperature.
Recommended shelf positions 4 3 2 Position 4 = T/fan baking Position 2 = T/Fan roasting / baking Position 1 = T/Fan roasting (large) 1 Baking guide • Thermofan baking is done with the oven trays in position. • For small items the entire area of each tray may be utilised. Larger items should be placed towards the front of each tray. • All ovens extract a certain amount of moisture from the food being cooked.
6 CONVENTIONAL GRILLING • • • • • The oven door must remain closed when grilling. Use only a wire shelf when grilling as the intense heat could warp the baking tray. Set the multifunction knob to conventional grill. Set the oven thermostat to the grill position. Operating instructions are otherwise the same as those for turbo grilling mentioned previously. PRECAUTIONS • Only use the appliance for preparing food.
MAINTENANCE Lift-off oven door The oven door may be removed to improve oven access during cleaning Grasp the open door on both sides near the hinges Flip the retainer clasps up and over the hook on the upper hinge arm. Maintain upward pressure on the door to prevent the clasps from disengaging Removing the inner door glass. • The glass may be removed for cleaning purposes by removing the two screws which hold it in place. • It is now possible to clean the inside of the outer glass if required.
Oven light The oven light is switched on by the multifunction selector switch and switches off when the knob is returned to 0. To replace a faulty light bulb, proceed as follows. • Switch off the power at the wall switch to avoid the possibility of electric shock. • Remove the light cover by unscrewing it in an anti-clockwise direction. • Unscrew the faulty bulb and fit a new 25 watt bulb rated for 300°C. • Refit the light cover.
CARE GUIDE FOR STAINLESS STEEL Stainless steel is not adversely affected by normal household use but because of it’s reputation for durability, it is sometimes assumed to be indestructible, and therefore subjected to misuse or even abuse. Care should be taken to avoid such ‘abnormal use’. Cleaning materials DO USE • A soft cloth or synthetic sponge. • Soap, or a mild household detergent. • Diluted ammonia in warm water. • A nylon bristle brush. • Cleaners labelled “Suitable for stainless steel”.
CONDITION ACTION Requires routine cleaning Mild detergent solution applied with soft sponge or cloth. Rinse and wipe dry. Finger prints Pre-treat finger marks with alcohol or an organic solvent. Follow immediately with routine cleaning. NOTES AND COMMENTS If possible use warm to hand-hot water. A 5% addition of ammonia is beneficial. Minimize re-occurrence by applying a wax or silicone based household polish to the clean dry surface. Wipe with a little baby oil and Apply whenever necessary.
PROBLEM CHECK Before calling a service technician to assist with a problem, PLEASE CHECK THE FOLLOWING The main distribution board. The wall switch. Check that “Key lock” on the timer is not activated (see page 6) Ensure that the timer is set to manual. (Press button 4 on the timer) Should your timer display “HELP”, please contact your nearest Defy Service Centre. Remember that you may be charged for a service call, even during the warranty period, if the fault is due to or caused by any of the above.
