Service manual

2-1
CHAPTER
2
Installation
This chapter consists of the following sections:
■ Section 2.1 “Tools and Parts Needed” on page 2-1
■ Section 2.2 “Placement in the Rack” on page 2-5
■ Section 2.3 “Installing the Media Tray” on page 2-6
■ Section 2.4 “Server Top Placement” on page 2-10
2.1 Tools and Parts Needed
You will need the following tools and parts:
■ One No. 2 Phillips screwdriver
■ One torque-measuring wrench or screwdriver
■ Two mounting rails
■ One Sun StorEdge D240 Media Tray
■ Fourteen panhead screws
■ Six or twelve flathead screws
■ Two mounting ears