Service manual

2-10 Sun StorEdge D240 Media Tray Installation, Operation, and Service Manual • August 2001
9. Partially install the rear media tray screws. Do not tighten the screws.
Use the front screw location for the Sun Enterprise Expansion Cabinet.
Use the rear location for the Sun StorEdge Expansion Cabinet.
10. Slide the media tray into the two rails until the mounting ears are fully seated
against the front of the rack as shown in
FIGURE 2-10.
FIGURE 2-10 Sliding the Media Tray Into the Mounting Rails
11. Use four screws (two per side) to secure the media tray mounting ears to the rack
and the rear of the media tray to the rear of the rack. Torque the screws to 3.3–4.1
N-m (29–36 in-lbs).
Tighten the two rear screws.
2.4 Server Top Placement
The server top media tray is equipped with non-skid feet to allow it to be placed on
top of Sun’s deskside server. Mounting the server top tray requires no tools, but its
weight requires two people.
1
2
3
4
5
6