Operation Manual

Page 8
Microwave cooking
1. Press the m/w button. The microwave indicator
lights up. 100% and SET TIME are displayed.
2. Select the power level by pressing the m/w button
repeatedly until the appropriate level is displayed
( from 100% to 10%).
3. Turn the dial knob to set the desired cooking time.
The selected time and PRESS START are dis-
played.
4. Press the start/speedy cook button. The oven light
switches on and the tray starts rotating.
5. Cooking commences and the remaining time is
counted down in the display.
6. The power level may be checked during the cook-
ing cycle by pressing the m/w button The power
level will then be displayed for about 3 seconds.
During those 3 seconds the power level may be
changed if so desired by repeatedly pressing the
m/w button until the appropriate level is displayed.
7. At the end of the cooking period the oven will beep
3 times and OPEN DOOR will be displayed.
8. Open the door, remove the cooked food and press
the stop/clear button.
Power level table
Microwave cooking allows you to set the desired power level and the duration of the cooking pe-
riod.
The oven will automatically cook at 100% power unless a lower power level is selected.
To activate microwave cooking , proceed as follows:
Power level Percentage Output
High 100% 1000W
Sauté 90% 890W
Re-heat
80% 790W
Medium—high 70% 680W
Simmer 60% 580W
Medium 50% 480W
Medium—low
40% 370W
Low 30% 270W
Defrost
20% 170W
Warm 10% 100W