Operation Manual

Page 22
Memory cook
If you often cook the same dish, you may store the cooking time and function in the oven’s mem-
ory. This saves re-setting every time the dish is cooked. To set the memory, proceed as follows:
1. Set your favourite cooking programme as previ-
ously described.( Auto defrost, cake, crusty and
auto cook programmes cannot be stored in mem-
ory)
2. Press the memory button. The oven will beep and
0 or the clock are displayed. Your setting is now
stored in memory.
3. To store a different settings simply repeat the set-
ting procedure.
1. Press the memory button. The stored setting ap-
pears in the display.
2. Press the start/speedy cook button. The oven light
switches on and the tray starts rotating.
3. Cooking commences and the remaining time is
counted down in the display.
4. At the end of the cooking period the oven will beep
3 times and OPEN DOOR will be displayed
5. Open the door, remove the food and press the stop/
clear button.
To use the memory function proceed as follows:
When there is no memory setting stored, DATA
EMPTY SELECT FUNCTION will be displayed
Speedy cook
1. Press the start/speedy cook button. The micro-
wave indicator and 30 seconds are displayed
2. To increase the time by 30 second increments,
press the start/speedy cook button repeatedly until
the desired time is displayed.
3. Cooking commences and the remaining time is
counted down in the display.
4. At the end of the cooking period the oven will beep
3 times and OPEN DOOR will be displayed
5. Open the door, remove the food and press the stop/
clear button.
Selecting speedy cook, enables the oven to operate immediately at full power. Pressing the start/
speedy cook button repeatedly increases the time by 30 second increments
To set the memory, proceed as follows: