Operation Manual

TUNE IN STATIONS
10
USING BUILT-IN ANTENNA
1.It only works when listen to AM Broadcast..
2. While listening to AM station, rotate the radio to find the
position which gives the best reception, as the built-in
ferrite bar is located inside the unit and it is strongly
affected by the direction of placing of the unit.
MANUAL TUNING
Turn on the radio and select FM Radio from <Main Menu>
by rotating the Tuning Knob. Press the Tuning Knob to enter,
then choose your desired band by pressing on either the FM,
AM or SW button.
Using either of the methods below to tune into your desired
station:
1. Rotate the Tuning Knob or press the < >,< >
button.
Volume Level (0~31)
Signal Intensity
06
M02
MHz
89.8
PMFM
Band Symbol
Frequency Display
Frequency Point
2.Press and hold the < > or < > button for about
two seconds, then release to auto tune into the next
available station.