Operation Manual

TUNE IN STATIONS

DIRECTLY INPUT FREQUENCY

STORING STATIONS MANUALLY

In Radio Mode,

corresponds to a station’s frequency, and then press < >

button to directly enter.

press the number on the keypad that

Note: When listening to <m> bands, it is invalid if your input

is out of the frequency range.

Select your desired station, press the tuning knob or the

< > button and rotate the Tuning Knob to select <Save>,

then rotate the Tuning Knob or the < >,< > button

to select memory location from 1~50 in FM/SW mode or

1~25 in AM mode. Press the Tuning Knob again to confirm.

Memory Locations:

FM/SW(manual storage): M1 ~ M50

AM(manual storage): M1 ~ M25

LISTENING TO STORED MEMORIES

1. After storing stations into memory, press the < > or < >

button with the memory address M01~M99 shown on the

display(next to the frequency) to select your desired station

memory.

2. In radio mode, press the number on the keypad that

corresponds to a station’s memory number, then press

the < > button to enter the stored station.