Operation Manual

27
ALARM SET
1. Select [Alarm] in Sys Set mode and press the Tuning Knob,
[New] appears on the display.
2. Press the Tuning Knob again to enter the new alarm setting,
[Normal alarm/ Power on/ Power off/ Exit] appears.
3. Rotate the Tuning Knob to select Normal Alarm and press
the Tuning Knob. Now [Only Once/ Daily] shows on the
display.
4. Rotate the Tuning Knob to select either [Only Once/Daily],
press the Tuning Knob to enter [Alarm Time Setting].
5. Rotate the Tuning Knob to adjust hours, minutes and
seconds. Press the Tuning Knob to confirm. Now it shows
[Yes/No] and [Do you want to add?] on the display.
6. Rotate the Tuning Knob to select [Yes], press the Tuning
Knob to confirm and enter the below setting sections:
Press the < > button to turn off the alarm, and press any
other buttons to pause the alarm, and it will play again in few
minutes.
- Sleep Time: 1~30 minutes SNOOZE timer
- Play Time: 1~30 minutes alarm time
- Alarm Count: 1~30 alarm count
- Alarm Music: Audio/Record alarm music selection
- Alarm Volume: 1~31 level
- Alarm Preview: Alarm with your preset music
- Exit: Exit the alarm setting
ALARM SET