Operation Manual

POWER OFF MODE

Select [Power Off] in Sys Set mode, press the Tuning Knob

to enter and rotate the Tuning Knob to enter the below

settings:

Standby mode: After turn off the unit, you can check time by

press any button.

Sleep mode: After turn off the unit, only the < > button

works. This mode can save more electricity.

CONTRAST SETTING

POWER OFF MODE

Select [Contrast] in Sys Set mode and press the Tuning Knob

to enter. The brightness level 0~16 appears on the display,

rotate the Tuning Knob to adjust, and then press the Tuning

Knob to confirm and exit.

MEMORY INFO

Select [Memory Info] in Sys Set mode and press the

Tuning Knob to display the memory status. Press the

< >, < > can shift checking the memory status

of the unit or the SD card.